SPP101 / Двигатель

126-8216 AIR COMPRESSOR GP S/N NME1-UP PROVIDES COMPRESSOR WITHOUT GOVERNOR, WITH AIR INLET TO COMPRESSOR FROM INTAKE MANIFOLD TO TOP OF COMPRESSOR FOR USE WITH COMPRESSOR LINES

149-4915 AIR COMPRESSOR GP S/N NME1-UP 13.2 CFM AT 1250 RPM. TU-FLO 550 PART OF 126-8216 AIR COMPRESSOR GP

216-7922 CAMSHAFT GP S/N NME1-UP

4W-3462 CARRIER GP-SEAL S/N NME1-UP

205-2199 COVER GP-CYLINDER BLOCK S/N NME1-UP FOR USE WITH 202-2371

168-8639 COVER GP-FRONT HOUSING S/N NME1-UP REQUIRES FASTENER & FILLER OR COVER

172-8732 COVER GP-FRONT HOUSING S/N NME1-UP FOR USE WITH RH SERVICED ENGINES

135-5035 COVER GP-VALVE MECHANISM S/N NME1-UP REAR BREATHER, FRONT OIL FILL

113-6087 CRANKSHAFT GP S/N NME1-UP

129-1165 CYLINDER BLOCK GP S/N NME1-UP

263-3774 CYLINDER BLOCK GP S/N NME1-UP PART OF 305-8141 CYLINDER BLOCK GP

305-8141 CYLINDER BLOCK GP S/N NME1-UP PART OF 129-1165 CYLINDER BLOCK GP

227-5951 CYLINDER HEAD AS S/N NME1-UP PART OF 227-5953 CYLINDER HEAD GP FIELD REPLACEMENT ORDER 227-5952

227-5952 CYLINDER HEAD AS S/N NME1-UP FIELD REPLACEMENT FOR 227-5951

278-3490 CYLINDER HEAD AS S/N NME1-UP PART OF 227-5952 CYLINDER HEAD AS

133-3742 CYLINDER HEAD GP S/N NME1-UP

227-5953 CYLINDER HEAD GP S/N NME1-UP PART OF 227-5954 CYLINDER HEAD GP

227-5954 CYLINDER HEAD GP S/N NME1-UP PART OF 133-3742 CYLINDER HEAD GP

194-9458 DAMPER & PULLEY GP S/N NME1-UP 2-GROOVE PULLEY, 190-MM DIAMETER DAMPER FOR USE WITH 194-9469

165-6934 DAMPER GP S/N NME1-UP DOES NOT INCLUDE MOUNTING HARDWARE

118-2073 DRAIN GP-ENGINE OIL S/N NME1-UP

7C-4566 DRAIN GP-ENGINE OIL S/N NME1-UP FOR USE WITH 126-5931 , ALUMINUM OIL PANS THAT REQUIRE AN ADDITIONAL LONG PLUG, 28-LITER OIL PANS, C9 ACERT WET PETROLEUM ENGINE WHEN USING AN AIR COMPRESSOR OPTION

194-9463 DRIVE GP-FAN S/N NME1-UP MULTI-POSITION V-BELT ADJUSTMENT; 11 INCH T0 22 INCH FAN HEIGHT FOR USE WITH 198-7629

120-6657 DRIVE GP-WATER PUMP S/N NME1-UP 1.33:1 DRIVE RATIO

194-9469 FASTENER GP-DAMPER & PULLEY S/N NME1-UP DAMPER/PULLEY FOR USE WITH 194-9458 CANNOT BE USED WITH STUB SHAFT

198-7629 FASTENER GP-FAN DRIVE S/N NME1-UP FOR USE WITH 194-9463 , 11 INCH FAN DRIVE HEIGHT

142-8329 FASTENER GP-FRONT COVER S/N NME1-UP 2 STUD

113-6170 FASTENER GP-LIFTING -ENGINE, REAR S/N NME1-UP CANNOT BE USED WITH REMOTE FUEL FILTER

180-0127 FLYWHEEL GP S/N NME1-UP SAE # 2 FOR USE WITH 117-5118

205-1321 GEAR GP-FRONT S/N NME1-UP

233-7464 GUARD GP-BELT S/N 7151-UP PART OF 217-5890 GENERAL AR-PUMPER

117-5118 HOUSING GP-FLYWHEEL S/N NME1-UP SAE NO. 2 HOUSING FOR FRONT MOUNTED STARTING MOTOR

133-5055 HOUSING GP-FRONT S/N NME1-UP

139-4081 LIFTER GP-VALVE -MECHANISM S/N NME1-UP PART OF 135-2969 VALVE MECHANISM GP

153-5417 LIFTING GP-ENGINE S/N NME1-UP REAR FOR USE WITH 113-6170 , REMOTE FUEL FILTER

142-8332 LINES GP-AIR COMPRESSOR S/N NME1-UP FOR USE WITH AIR COMPRESSOR WITH TOP AIR INLET

219-6259 LINES GP-AIR COMPRESSOR S/N NME1-UP

194-9454 MOUNTING GP-ALTERNATOR S/N 7151-UP PROVIDES ADJUSTABLE ROD & STRAPS PART OF 235-1927 ALTERNATOR GP-CHARGING FOR USE WITH V-BELT FRONT END DRIVE

214-5862 MOUNTING GP-ENGINE S/N NME1-UP FOR USE WITH SAE #2 OR #3 FLYWHEEL HOUSING, RH STARTER

234-3040 MOUNTING GP-ENGINE S/N 7151-UP PART OF 217-5890 GENERAL AR-PUMPER

197-0649 MOUNTING GP-FAN DRIVE S/N NME1-UP FOR USE WITH FAN HEIGHTS OF 11 TO 22 INCHES, VEE BELT FRONT DESIGN DRIVE

126-5931 PAN GP-OIL -ENGINE S/N NME1-108 31 LITER. FRONT SUMP FOR USE WITH 7C-4566

126-5931 PAN GP-OIL -ENGINE S/N NME109-UP 31 LITER. FRONT SUMP FOR USE WITH 7C-4566

161-8420 PISTON & ROD GP S/N NME1-UP 16:1 COMPRESSION RATIO

159-0303 PLUG GP-CYLINDER BLOCK S/N NME1-UP REQUIRED WHEN REMOTE MOUNT COOLANT CONDITIONER IS NOT USED

162-8068 PLUG GP-ENGINE -OIL GALLERY S/N NME1-UP

216-8618 PLUG GP-ENGINE S/N NME1-UP FOR USE WITH 205-2199 , ACCESSORY DRIVE

121-0802 PLUG GP-FLYWHEEL HOUSING S/N NME1-UP

197-0648 PULLEY GP-CRANKSHAFT S/N NME1-UP FOR USE WITH VEE BELT FRONT DRIVE DESIGN

198-7628 PULLEY GP-FAN S/N NME1-UP 275-MM DIAMETER

256-3831 ROCKER ARM GP -EXHAUST S/N NME109-UP PART OF 256-3830 VALVE MECHANISM GP

256-3834 ROCKER ARM GP -INLET S/N NME109-UP PART OF 256-3830 VALVE MECHANISM GP

122-8929 SEAL GP-CRANKSHAFT S/N NME1-UP FOR USE WITH DRY FLYWHEEL HOUSING

230-2540 SUPPORT GP-ENGINE -FRONT S/N NME1-UP

135-2969 VALVE MECHANISM GP S/N NME1-108

135-2969 VALVE MECHANISM GP S/N NME109-UP

235-5528 VALVE MECHANISM GP S/N NME1-UP PART OF 135-2969 VALVE MECHANISM GP

256-3830 VALVE MECHANISM GP S/N NME109-UP PART OF 135-2969 VALVE MECHANISM GP