SBF214 / Двигатель

133-7032 AIR COMPRESSOR GP S/N CPN1-UP 16.5 CFM, 1.14:1 RATIO FOR USE WITH 117-0185

164-7564 AIR COMPRESSOR GP S/N CPN1-UP 16.5 CFM AT 1250 RPM PART OF 133-7032 AIR COMPRESSOR GP

192-6482 CAMSHAFT GP S/N CPN1-UP

115-2985 COVER GP-CYLINDER BLOCK S/N CPN1-UP FOR USE WITH 117-2786 , SPIN ON PAPER BYPASS FILTER OR WHEN NO BYPASS FILTER IS USED

127-5728 COVER GP-FLYWHEEL HOUSING S/N CPN1-UP

113-8987 COVER GP-FRONT HOUSING S/N CPN1-UP POWER TAKE-OFF

132-3212 CRANKSHAFT GP S/N CPN1-UP

200-2054 CYLINDER BLOCK AS S/N CPN1-UP PART OF 204-3449 CYLINDER BLOCK AS

204-3449 CYLINDER BLOCK AS S/N CPN1-UP PART OF 115-2983 CYLINDER BLOCK GP

115-2983 CYLINDER BLOCK GP S/N CPN1-UP

179-9458 CYLINDER HEAD AS S/N CPN1-UP PART OF 179-9461 CYLINDER HEAD AS, 148-2144 CYLINDER HEAD GP FIELD REPLACEMENT ORDER 179-9461

179-9461 CYLINDER HEAD AS S/N CPN1-UP FIELD REPLACEMENT FOR 179-9458

132-3208 CYLINDER HEAD GP S/N CPN1-UP

148-2144 CYLINDER HEAD GP S/N CPN1-UP PART OF 132-3208 CYLINDER HEAD GP

117-2766 DAMPER GP S/N CPN1-UP PROVIDES A VISCONIC DAMPER, ADAPTER AND FASTENING HARDWARE TO ATTACH THE DAMPER TO THE ADAPTER. FOR USE WITH 180-5168

128-3415 DRIVE GP-FAN S/N CPN1-UP ADJUSTABLE

116-1083 FASTENER GP-CYLINDER HEAD S/N CPN1-UP PART OF 116-5408 MOUNTING GP-VALVE MECHANISM

117-2771 FASTENER GP-DAMPER & PULLEY S/N CPN1-336

180-5168 FASTENER GP-DAMPER & PULLEY S/N CPN337-UP FOR USE WITH CAST IRON CRANKSHAFT PULLEYS

155-4313 FASTENER GP-FLYWHEEL S/N CPN1-UP FOR USE WITH 155-6615 , SAE NO. 1 FLYWHEEL

155-6615 FLYWHEEL GP S/N CPN1-UP SAE NO. 1 FOR USE WITH 155-4313

117-2750 GEAR GP-FRONT S/N CPN1-UP

201-2054 GUARD GP-BELT S/N CSB1-UP PART OF 198-9636 GENERAL AR ALSO AN ATTACHMENT

156-2601 HOUSING GP-FLYWHEEL S/N CPN1-UP SAE NO.1. CAST IRON FOR USE WITH DRY TRANSMISSION

133-7075 HOUSING GP-FRONT S/N CPN1-UP

148-2063 LIFTER GP-VALVE -MECHANISM S/N CPN1-UP PART OF 117-2749 VALVE MECHANISM GP

117-2748 LIFTING GP-ENGINE S/N CPN1-UP STANDARD

137-4982 MOUNTING GP-ALTERNATOR S/N CPN1-UP PROVIDES A HIGH RH SIDE ALTERNATOR MOUNT WITHOUT AN ADJUSTMENT ROD FOR USE WITH 9X-7803

198-9597 MOUNTING GP-ENGINE S/N CSB1-295 PART OF 198-9636 GENERAL AR ALSO AN ATTACHMENT

198-9597 MOUNTING GP-ENGINE S/N CSB296-UP PART OF 198-9636 GENERAL AR

138-2551 MOUNTING GP-FAN DRIVE S/N CPN1-UP ADAPTABLE TO MULTIPLE FAN MOUNTING STUDS

165-0691 MOUNTING GP-FAN DRIVE S/N CPN1-UP FOR USE WITH 159-2597

116-5408 MOUNTING GP-VALVE MECHANISM S/N CPN1-UP SHORT, FLAT VALVE COVERS FOR USE WITH ENGINES NOT EQUIPPED WITH ENGINE COMPRESSION BRAKE

117-2777 PAN GP-OIL -ENGINE S/N CPN1-UP FRONT DEEP SUMP

117-2697 PANEL GP-SOUND SUPPRESSION -ENGINE OIL PAN S/N CPN1-UP FOR USE WITH 117-2777

130-0863 PISTON & ROD GP S/N CPN1-UP 16:1 COMPRESSION RATIO

115-2984 PLUG GP-CYLINDER BLOCK S/N CPN1-UP PROVIDES PORT PLUGS FOR THE RIGHT HAND OIL GALLERY

117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END S/N CPN1-UP

117-0185 PLUG GP-CYLINDER BLOCK S/N CPN1-UP PROVIDES PLUG FOR 4 CYLINDER AIR COMPRESSOR DRAIN FOR USE WITH TWO CYLINDER AIR COMPRESSOR

138-2028 PLUG GP-CYLINDER BLOCK S/N CPN1-UP USE WHEN DIPSTICK IS NOT REQUIRED

138-2579 PULLEY GP-CRANKSHAFT S/N CPN1-UP V-BELT, 2 GROOVE

130-5481 PULLEY GP-FAN DRIVE S/N CPN1-UP FAN DRIVE RATIO: .694:1

2W-8494 PULLEY-ALTERNATOR S/N CPN1-UP 93.68-MM DIAMETER, 2-GROOVE. V-BELT FOR USE WITH 9X-7803

115-9397 ROCKER ARM GP S/N CPN1-UP PART OF 117-2749 VALVE MECHANISM GP

116-1091 SEAL GP-CRANKSHAFT S/N CPN1-UP REAR

115-3004 SUPPORT GP-ENGINE S/N CPN1-UP FRONT

7M-4710 V-BELT SET -2 BELTS S/N CPN1-UP 2159 MM (85 IN) LG FOR USE WITH 130-5481

117-2749 VALVE MECHANISM GP -ENGINE S/N CPN1-UP