D6E / Таблички, комплекты и диагностика

2Y2578 TOOL GP-HAND 8F9866-PAGE 219 AN ATTACHMENT

8F9866 GREASE GUN AS PART OF 2Y2578 TOOL-HAND AN ATTACHMENT

5Y2561 FILM GP PART OF NAME PLATES & FILMS

NAME PLATES & FILMS-PART 1 OF 2

NAME PLATES & FILMS-PART 2 OF 2

126-2498 FILM GP S/N 2MJ2654-UP PART OF 125-9191 PLATE & FILM GP

339-6231 FILM GP S/N R6J1698-UP PART OF 151-5311 ENGINE AR

8F-9866 GREASE GUN GP S/N 2MJ2654-UP PART OF 2Y-2578 TOOL GP-HAND Type 1 AN ATTACHMENT

8F-9866 GREASE GUN GP S/N 2MJ2654-UP PART OF 2Y-2578 TOOL GP-HAND Type 2 AN ATTACHMENT

155-1379 KIT-GASKET -SINGLE CYLINDER HEAD S/N 2MJ2654-UP CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD FIELD REPLACEMENT ORDER 392-4479 FIELD INSTALLATION

208-4836 KIT-GASKET -WATER PUMP S/N 6NC2650-UP; 2MJ2654-UP; R6J1698-UP THIS KIT IS FOR ALL 3300 ENGINES AND COME WITH ALL 3300 REMAN WATER PUMPS. THIS KIT CONTAINS THE GASKETS AND SEALS TO INSTALL THE BYPASS ELBOW AND MAIN WATER PUMP PART OF 431-4157 KIT-ENGINE OVERHAUL FIELD REPLACEMENT FOR 170-1834 KIT-GASKET, 171-3686 KIT-GASKET, 204-4464 KIT-GASKET

281-0029 KIT-GASKET -SINGLE FUEL INJECTOR SEALS S/N 6NC2650-UP; 2MJ2654-UP; R6J1698-UP KIT CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO THE CYLINDER HEAD PART OF 431-4157 KIT-ENGINE OVERHAUL FOR USE WITH 151-5311 ALSO FIELD INSTALLATION

297-1744 KIT-GASKET -WATER PUMP S/N 2MJ2654-UP KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES. FOR USE WITH 151-5311 FIELD INSTALLATION

387-9520 KIT-GASKET -SINGLE FUEL INJECTOR SEALS S/N 2MJ2654-UP CONTAINS THE SEALS NEEDED TO REINSTALL ONE INJECTOR INTO THE CYLINDER HEAD. FOR USE WITH 151-5311 FIELD INSTALLATION

391-8604 KIT-GASKET -CENTRAL, LOWER STRUCTURE S/N 6NC2650-UP; 8TD10430-UP; R6J1-UP FIELD INSTALLATION

392-4479 KIT-GASKET -SINGLE CYLINDER HEAD S/N 2MJ2654-UP OPTIONAL FIELD REPLACEMENT ORDER 518-3990 FIELD REPLACEMENT FOR 155-1379

392-8139 KIT-GASKET S/N 6NC2650-UP; 2MJ2654-UP; R6J1698-UP CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS PART OF 431-4157 KIT-ENGINE OVERHAUL FIELD REPLACEMENT FOR 6V-0900 KIT-GASKET ALSO FIELD INSTALLATION

394-1442 KIT-GASKET -OIL COOLER, LINES S/N 6NC2650-UP; 2MJ2654-UP; R6J1698-UP KIT CONTAINS THE GASKETS & SEALS TO ASSEMBLE & REINSTALL THE OIL COOLER(S). OIL FILTER BASE & ATTACHING LINES PART OF 431-4157 KIT-ENGINE OVERHAUL FOR USE WITH 151-5311 ALSO FIELD INSTALLATION

430-4576 KIT-GASKET S/N 2MJ2654-UP KIT CONTAINS GASKETS, SEAL, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS. FOR USE WITH 151-5311 FIELD INSTALLATION

430-4632 KIT-GASKET -CENTRAL AND LOWER STRUCTURE S/N 6NC2650-UP; 2MJ2654-UP; R6J1698-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, & BLOCK COVERS PART OF 431-4157 KIT-ENGINE OVERHAUL FOR USE WITH 151-5311 ALSO FIELD INSTALLATION

430-4634 KIT-GASKET -SINGLE CYLINDER HEAD S/N 6NC2650-UP; 2MJ2654-UP; R6J1698-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP PART OF 431-4157 KIT-ENGINE OVERHAUL FOR USE WITH 151-5311 ALSO FIELD INSTALLATION

518-3990 KIT-GASKET S/N 2MJ2654-UP CLASSIC

5P-8768 KIT-GASKET -SINGLE CYLINDER LINER S/N 2MJ2654-UP FIELD INSTALLATION

8C-8745 KIT-GASKET -REAR STRUCTURE S/N 6NC2650-UP; 2MJ2654-UP; R6J1698-UP PART OF 431-4157 KIT-ENGINE OVERHAUL ALSO FIELD INSTALLATION

125-9191 PLATE & FILM GP S/N 2MJ2654-UP PART OF 125-7846 CHASSIS AR

5M-8212 PLATE & FILM GP S/N 8TD10430-99999 PART OF 125-6716 ENGINE AR

2Y-2578 TOOL GP-HAND S/N 2MJ2654-UP AN ATTACHMENT